Lab/Technology Info Home Page         Blank Seating Charts        Computer Lab Index Page         Forms         Help & Instructions

    
             
       

Help & Instructions

        
   

Keyspan Presentation Remote

    
                 
   

 

  

 

 

    
    The remote has 2 modes which are controlled via the Mode button (white button).
When the Mode button is not showing a green light, the remote is in Standard mode.
When the Mode button is lit green, then the remote is in Media mode.		    
   

 

          

 

    
         


STANDARD MODE

MEDIA MODE
(Windows Only)

        
        Laser Pointer (P) Laser Beam On/Off Windows Media Player on        
                     
        Mouse Control Mouse Cursor Up = Previous Track        
                     
        Left Mouse Button (L) Left Mouse Button Play/Pause toggle        
                     
        Right Mouse Button (R) Right Mouse Button Stop        
                     
        Mode Button (M) Green LED off Green LED on        
                     
        Composite Switch (C) Up = Line Up Up = Volume Up        
          Down = Line Down Down = Volume Down        
          Push = Click & Drag Push = Mute        
                 
        Please Note:        
       

Laser Pointer turns off after 30 seconds of non-use.
Media Mode turns off after 20 seconds of non-use.

        
                 
                 
        Using the Remote To Control Your Presentation Software:        
        To control your presentation software (ie PowerPoint), first launch your software and enter its 'slideshow' mode.  Once you are in the slideshow, use the Composite Switch to move backwards and forward in your slideshow.  You can also control your mouse cursor by using the Mouse button and the Left/Right Click buttons.        
                 
        Using the Laser Pointer:        
        To turn on the Laser Pointer, hold down the Laser Pointer button (orange button) AND the Mode button (white button) simultaneously.  The Mode button will show a red light when the Laser is activated.  To deactivate the laser, hold down the Laser Pointer button (orange button) until the Mode button flashes rapidly.        
                 
        Changing the Remote's ID/Trouble Shooting:        
        You can have several remotes within range of each other working simultaneously.  To do this, each Remote must have a unique ID.  To change your Remote's ID, press the Mode Button AND Composite Switch (C) together until the Mode Button flashes green rapidly.  Then using a paperclip, press the ID Button on the receiver (shown on right).  To get the RF Receiver to learn the new ID, press the Composite Switch (C).  Changing the Remote's ID is also useful if you are experiencing that your CPU no longer responds to the Remote.      
           

8/21/08 J.E. Royster